The cantilever rack for Euro pallets
from 1.378,00€
excl. VAT
Heavy duty boltless shelving for cut-to-size Euro pallets as a boltless shelving system with extremely high storage density.
Shelf dimensioning and production according to RAL-RG 614 and DIN EN 15635 with 2-fold safety against breakage and a permissible deflection of L/200.
Also suitable for clip-on folding frames.
Shelving construction against abrasion and permanent corrosion protection totally hot-dip galvanised in accordance with DIN EN ISO 1461, suitable for indoor and outdoor use, uprights painted in RAL Classic colours on request.
Delivery: Free delivery within Germany, self-assembly according to instructions
Plug-in shelving for Euro pallets.
Shelving construction against abrasion and permanent corrosion protection totally hot-dip galvanised in accordance with DIN EN ISO 1461, suitable for indoor and outdoor use, uprights painted in RAL Classic colours on request.
Statics and storemaster®-safety equipment has been recommended by the BG for more than 20 years.
In order to ensure the stability of cantilever racks of the usual design, a tension-resistant floor anchorage must be provided. This requires a suitable floor condition, which is often not available (interlocking paving stones, asphalt, wooden paving stones, ceramic floors, underfloor heating, etc.).
This circumstance is storemaster® by constructive measures that ensure tilt resistance even without any floor fixings.
However, the shelving should still be secured against shifting by fork-lift truck impacts, e.g. by means of simple drop-in anchors. If the condition of the installation surface does not allow for this satisfactorily either, it is more difficult to storemaster®-The shelving components can be significantly dodged and deformed by forklift impacts.
Only in outdoor areas with roof and wall must the installation be carried out on concrete slabs or appropriate foundations in accordance with the building regulations, as here a tension-resistant ground anchorage is mandatory due to the wind and snow loads that occur.
The shelf end height is: top storage level + 300 mm as push-through protection to secure the top storage level against falling from the rear.
Universal pallet racking with 1 tonne load capacity per linear metre of shelving
excl. VAT
Select options
The cost killer with euroFLAT® Uniform palette for every application
excl. VAT
Select options
Sheet metal standard shelf Universal
Sheet metal storage for wooden pallets and euroFLAT®
Solid prof. steel construction, shelf heights pluggable
excl. VAT
Select options
Call us or
send us
simply send a WhatsApp message!
Mon. - Fri. 8:00 - 18:00 (MET)