Universal pallet racking with 1 tonne load capacity per linear metre of shelving
from 3.098,00€
excl. VAT
Cantilever boltless shelving system for pallets with overhang and bulky goods of all kinds.
Shelf dimensioning and production according to RAL-RG 614 and DIN EN 15635 with 2-fold safety against breakage and a permissible deflection of L/200.
Shelving construction against abrasion and permanent corrosion protection totally hot-dip galvanised in accordance with DIN EN ISO 1461, suitable for indoor and outdoor use, uprights painted in RAL Classic colours on request.
Delivery: Free delivery within Germany, self-assembly according to instructions
Push-in racking for Euro pallets with lateral overhang (e.g. long goods) on endless storage areas.
Endless shelves for 1,000 kg per running m of shelving, 1,250 mm deep for lengthwise storage of Euro pallets.
The clear exit shelf heights are 630 mm and are particularly easy to adjust in height in a plug-in grid of 75 mm thanks to jam-free suspensions; this means that individual gradations can also be created within a storage level, allowing adaptation to different storage unit heights and thus ensuring optimum storage space utilisation.
The full-surface, translucent grating compartment covers prevent dirt deposits (dirt and dust collect on closed compartment covers -> risk of deflagration); gratings also ensure the air circulation desired for the room climate and fulfil the fire protection safety regulations of sprinkler systems.
Shelving construction against abrasion and permanent corrosion protection totally hot-dip galvanised in accordance with DIN EN ISO 1461, suitable for indoor and outdoor use, uprights painted in RAL Classic colours on request.
Statics and storemaster®-safety equipment has been recommended by the BG for more than 20 years.
In order to ensure the stability of cantilever racks of the usual design, a tension-resistant floor anchorage must be provided. This requires a suitable floor condition, which is often not available (interlocking paving stones, asphalt, wooden paving stones, ceramic floors, underfloor heating, etc.).
This circumstance is storemaster® by constructive measures that ensure tilt resistance even without any floor fixings.
However, the shelving should still be secured against shifting by fork-lift truck impacts, e.g. by means of simple drop-in anchors. If the condition of the installation surface does not allow for this satisfactorily either, it is more difficult to storemaster®-The shelving components can be significantly dodged and deformed by forklift impacts.
Only in outdoor areas with roof and wall must the installation be carried out on concrete slabs or appropriate foundations in accordance with the building regulations, as here a tension-resistant ground anchorage is mandatory due to the wind and snow loads that occur.
The shelf end height is: top storage level + 300 mm as push-through protection to secure the top storage level against falling from the rear.
● Magnetic flag sign incl. magnetic label pocket for patent shelf or material labelling, rotatable on viewing angle incl. blank insertion label € 15.00 / pc.
● Footbalance association for installation without ground anchors on interlocking paving stones, asphalt, etc.
Bracing elements in the floor area stabilise the stability and counteract statically relevant shelf deformations caused by forklift impacts
Enquiry for ArmStrong® UniPal
Alternative: Give us a call or simply send us a WhatsApp message!
Mon. - Fri. 8:00 - 18:00 (MET)
