Back to the top of the page Euro pallet racking ArmStrong® EP
Plug-in shelving for Euro pallets.
Shelving construction against abrasion and permanent corrosion protection totally hot-dip galvanised in accordance with DIN EN ISO 1461, suitable for indoor and outdoor use, uprights painted in RAL Classic colours on request.
Statics and storemaster®-safety equipment has been recommended by the BG for more than 20 years.
Back to the top of the page
In order to ensure the stability of cantilever racks of the usual design, a tension-resistant floor anchorage must be provided. This requires a suitable floor condition, which is often not available (interlocking paving stones, asphalt, wooden paving stones, ceramic floors, underfloor heating, etc.).
This circumstance is storemaster® by constructive measures that ensure tilt resistance even without any floor fixings.
However, the shelving should still be secured against shifting by fork-lift truck impacts, e.g. by means of simple drop-in anchors. If the condition of the installation surface does not allow for this satisfactorily either, it is more difficult to storemaster®-The shelving components can be significantly dodged and deformed by forklift impacts.
Only in outdoor areas with roof and wall must the installation be carried out on concrete slabs or appropriate foundations in accordance with the building regulations, as here a tension-resistant ground anchorage is mandatory due to the wind and snow loads that occur.
The shelf end height is: top storage level + 300 mm as push-through protection to secure the top storage level against falling from the rear.
Back to the top of the page
Shelf label for cantilever shelving incl. magnetic label pocket with insert label for patented shelf or material labelling, rotatable on viewing angle incl. blank insert label € 20.00 / pc.
https://storemaster.shop/produkt/regalschild/
● Footbalance association for installation without ground anchors on interlocking paving stones, asphalt, etc.
Bracing elements in the floor area stabilise the stability and counteract statically relevant shelf deformations caused by forklift impacts